COMPUTER SCIENCE ENGINEERING SEMESTER 1 SYLLABUS

COMPUTER SCIENCE ENGINEERING SEMESTER 1 SYLLABUS

SUBJECTS

HS6151 Technical English – I
MA6151 Mathematics – I
PH6151 Engineering Physics – I
CY6151 Engineering Chemistry – I
GE6151 Computer Programming
GE6152 Engineering Graphics
GE6161 Computer Practices Laboratory
GE6162Engineering Practices Laboratory
GE6163 Physics and Chemistry Laboratory - I

---

---

HS6151 Technical English – I

L T P C
3 1 0 4
OBJECTIVES:
To enable learners of Engineering and Technology develop their basic communication skills in English. To emphasize specially the development of speaking skills amongst learners of Engineering and Technology. To ensure that learners use the electronic media such as internet and supplement the learning materials used in the classroom. To inculcate the habit of reading and writing leading to effective and efficient communication.

---

UNIT I 9+3
Listening - Introducing learners to GIE - Types of listening - Listening to audio (verbal & sounds); Speaking - Speaking about one’s place, important festivals etc. – Introducing oneself, one’s family / friend; Reading - Skimming a reading passage – Scanning for specific information - Note-making; Writing - Free writing on any given topic (My favourite place / Hobbies / School life, etc.) - Sentence completion - Autobiographical writing (writing about one’s leisure time activities, hometown, etc.); Grammar - Prepositions - Reference words - Wh-questions - Tenses (Simple); Vocabulary - Word formation - Word expansion (root words / etymology); E-materials - Interactive exercises for Grammar & Vocabulary - Reading comprehension exercises - Listening to audio files and answering questions.

---

UNIT II 9+3
Listening - Listening and responding to video lectures / talks; Speaking - Describing a simple process (filling a form, etc.) - Asking and answering questions - Telephone skills – Telephone etiquette; Reading – Critical reading - Finding key information in a given text - Sifting facts from opinions; Writing - Biographical writing (place, people) - Process descriptions (general/specific) - Definitions - Recommendations – Instructions; Grammar - Use of imperatives - Subject-verb agreement; Vocabulary - Compound words - Word Association (connotation); E-materials - Interactive exercises for Grammar and Vocabulary - Listening exercises with sample telephone conversations / lectures – Picture-based activities.

---

UNIT III 9+3
Listening - Listening to specific task - focused audio tracks; Speaking - Role-play – Simulation - Group interaction - Speaking in formal situations (teachers, officials, foreigners); Reading - Reading and interpreting visual material; Writing - Jumbled sentences - Coherence and cohesion in writing - Channel conversion (flowchart into process) - Types of paragraph (cause and effect / compare and contrast / narrative / analytical) - Informal writing (letter/e-mail/blogs) - Paraphrasing; Grammar - Tenses (Past) - Use of sequence words - Adjectives; Vocabulary - Different forms and uses of words, Cause and effect words; E-materials - Interactive exercises for Grammar and Vocabulary - Excerpts from films related to the theme and follow up exercises - Pictures of flow charts and tables for interpretations.

---

UNIT IV 9+3
Listening - Watching videos / documentaries and responding to questions based on them; Speaking - Responding to questions - Different forms of interviews - Speaking at different types of interviews; Reading - Making inference from the reading passage - Predicting the content of a reading passage; Writing - Interpreting visual materials (line graphs, pie charts etc.) - Essay writing – Different types of essays; Grammar - Adverbs – Tenses – future time reference; Vocabulary - Single word substitutes - Use of abbreviations and acronyms; E-materials - Interactive exercises for Grammar and Vocabulary - Sample interviews - film scenes - dialogue writing.

---

UNIT V 9+3 Listening - Listening to different accents, Listening to Speeches/Presentations, Listening to broadcast and telecast from Radio and TV; Speaking - Giving impromptu talks, Making presentations on given topics; Reading - Email communication - Reading the attachment files having a poem/joke/proverb - Sending their responses through email; Writing - Creative writing, Poster making; Grammar - Direct and indirect speech; Vocabulary - Lexical items (fixed / semi fixed expressions); E-materials - Interactive exercises for Grammar and Vocabulary - Sending emails with attachment – Audio / video excerpts of different accents - Interpreting posters.
TOTAL (L:45+T:15): 60 PERIODS
TEXTBOOKS:
1. Department of English, Anna University. Mindscapes: English for Technologists and Engineers. Orient Blackswan, Chennai. 2012.
2. Dhanavel, S.P. English and Communication Skills for Students of Science and Engineering. Orient Blackswan, Chennai. 2011.
REFERENCES:
1. Raman, Meenakshi & Sangeetha Sharma. Technical Communication: Principles and Practice. Oxford University Press, New Delhi. 2011.
2. Regional Institute of English. English for Engineers. Cambridge University Press, New Delhi. 2006
3. Rizvi, Ashraf. M. Effective Technical Communication. Tata McGraw-Hill, New Delhi. 2005
4. Rutherford, Andrea. J Basic Communication Skills for Technology. Pearson, New Delhi. 2001
5. Viswamohan, Aysha. English for Technical Communication. Tata McGraw-Hill, New Delhi. 2008
SUBJECTS

---

---

MATHEMATICS-1

L T P C
3 1 0 4
OBJECTIVES: To develop the use of matrix algebra techniques this is needed by engineers for practical applications.
To make the student knowledgeable in the area of infinite series and their convergence so that he/ she will be familiar with limitations of using infinite series approximations for solutions arising in mathematical modeling.
To familiarize the student with functions of several variables. This is needed in many branches of engineering.
To introduce the concepts of improper integrals, Gamma, Beta and Error functions which are needed in engineering applications.
To acquaint the student with mathematical tools needed in evaluating multiple integrals and their usage.

---

UNIT I MATRICES 9+3
Eigenvalues and Eigenvectors of a real matrix – Characteristic equation – Properties of eigenvalues and eigenvectors – Statement and applications of Cayley-Hamilton Theorem – Diagonalization of matrices – Reduction of a quadratic form to canonical form by orthogonal transformation – Nature of quadratic forms.

---

UNIT II SEQUENCES AND SERIES 9+3
Sequences: Definition and examples – Series: Types and Convergence – Series of positive terms – Tests of convergence: Comparison test, Integral test and D’Alembert’s ratio test – Alternating series – Leibnitz’s test – Series of positive and negative terms – Absolute and conditional convergence.

---

UNIT III APPLICATIONS OF DIFFERENTIAL CALCULUS 9+3
Curvature in Cartesian co-ordinates – Centre and radius of curvature – Circle of curvature – Evolutes – Envelopes - Evolute as envelope of normals.

---

UNIT IV DIFFERENTIAL CALCULUS OF SEVERAL VARIABLES 9+3
Limits and Continuity – Partial derivatives – Total derivative – Differentiation of implicit functions – Jacobian and properties – Taylor’s series for functions of two variables – Maxima and minima of functions of two variables – Lagrange’s method of undetermined multipliers.

---

UNIT V MULTIPLE INTEGRALS 9+3
Double integrals in cartesian and polar coordinates – Change of order of integration – Area enclosed by plane curves – Change of variables in double integrals – Area of a curved surface - Triple integrals – Volume of Solids.
TEXT BOOKS:
1. Bali N. P and Manish Goyal, “A Text book of Engineering Mathematics”, Eighth Edition, Laxmi Publications Pvt Ltd., 2011.
2. Grewal. B.S, “Higher Engineering Mathematics”, 41 st Edition, Khanna Publications, Delhi, 2011.
REFERENCES:
1. Dass, H.K., and Er. Rajnish Verma,” Higher Engineering Mathematics”, S. Chand Private Ltd., 2011.
2. Glyn James, “Advanced Modern Engineering Mathematics”, 3rd Edition, Pearson Education, 2012.
3. Peter V. O’Neil,” Advanced Engineering Mathematics”, 7th Edition, Cengage learning, (2012).
4. Ramana B.V, “Higher Engineering Mathematics”, Tata McGraw Hill Publishing Company, New Delhi, 2008.
5. Sivarama Krishna Das P. and Rukmangadachari E., “Engineering Mathematics”, Volume I, Second Edition, PEARSON Publishing, 2011.
SUBJECTS

---

---

PH6151 Engineering Physics – I

L T P C
3 0 0 3
OBJECTIVES:
To enhance the fundamental knowledge in Physics and its applications relevant to various streams of Engineering and Technology.

---

UNIT I CRYSTAL PHYSICS
Lattice – Unit cell – Bravais lattice – Lattice planes – Miller indices – d spacing in cubic lattice – Calculation of number of atoms per unit cell – Atomic radius – Coordination number – Packing factor for SC, BCC, FCC and HCP structures – Diamond and graphite structures (qualitative treatment)- Crystal growth techniques –solution, melt (Bridgman and Czochralski) and vapour growth techniques (qualitative)

---

UNIT II PROPERTIES OF MATTER AND THERMAL PHYSICS
Elasticity- Hooke’s law - Relationship between three modulii of elasticity (qualitative) – stress -strain diagram – Poisson’s ratio –Factors affecting elasticity –Bending moment – Depression of a cantilever –Young’s modulus by uniform bending- I-shaped girders Modes of heat transfer- thermal conductivity- Newton’s law of cooling - Linear heat flow – Lee’s disc method – Radial heat flow – Rubber tube method – conduction through compound media (series and parallel)

---

UNIT III QUANTUM PHYSICS
Black body radiation – Planck’s theory (derivation) – Deduction of Wien’s displacement law and Rayleigh – Jeans’ Law from Planck’s theory – Compton effect. Theory and experimental verification – Properties of Matter waves – G.P Thomson experiment -Schrödinger’s wave equation – Time independent and time dependent equations – Physical significance of wave function – Particle in a one dimensional box - Electron microscope - Scanning electron microscope - Transmission electron microscope.

---

UNIT IV ACOUSTICS AND ULTRASONICS
Classification of Sound- decibel- Weber–Fechner law – Sabine’s formula- derivation using growth and decay method – Absorption Coefficient and its determination –factors affecting acoustics of buildings and their remedies. Production of ultrasonics by magnetostriction and piezoelectric methods - acoustic grating -Non Destructive Testing – pulse echo system through transmission and reflection modes - A,B and C – scan displays, Medical applications - Sonogram

---

UNIT V PHOTONICS AND FIBRE OPTICS
Spontaneous and stimulated emission- Population inversion -Einstein’s A and B coefficients - derivation. Types of lasers – Nd:YAG, CO2 , Semiconductor lasers (homojunction & heterojunction)- Industrial and Medical Applications. Principle and propagation of light in optical fibres – Numerical aperture and Acceptance angle - Types of optical fibres (material, refractive index, mode) – attenuation, dispersion, bending - Fibre Optical Communication system (Block diagram) - Active and passive fibre sensors- Endoscope.
TEXT BOOKS:
1. Arumugam M. Engineering Physics. Anuradha publishers, 2010.
2. Gaur R.K. and Gupta S.L. Engineering Physics. Dhanpat Rai publishers, 2009
3. Mani Naidu S. Engineering Physics, Second Edition, PEARSON Publishing, 2011.
REFERENCES:
1. Searls and Zemansky. University Physics, 2009
2. Mani P. Engineering Physics I. Dhanam Publications, 2011.
3. Marikani A. Engineering Physics. PHI Learning Pvt., India, 2009.
4. Palanisamy P.K. Engineering Physics. SCITECH Publications, 2011.
5. Rajagopal K. Engineering Physics. PHI, New Delhi, 2011.
6. Senthilkumar G. Engineering Physics I. VRB Publishers, 2011
SUBJECTS

---

---

CY6151 Engineering Chemistry – I

L T P C
3 0 0 3
OBJECTIVES: To make the students conversant with basics of polymer chemistry.
To make the student acquire sound knowledge of second law of thermodynamics and second law based derivations of importance in engineering applications in all disciplines.
To acquaint the student with concepts of important photophysical and photochemical processes and spectroscopy.
To develop an understanding of the basic concepts of phase rule and its applications to single and two component systems and appreciate the purpose and significance of alloys.
To acquaint the students with the basics of nano materials, their properties and applications.

---

UNIT I POLYMER CHEMISTRY
Introduction: Classification of polymers – Natural and synthetic; Thermoplastic and Thermosetting. Functionality – Degree of polymerization. Types and mechanism of polymerization: Addition (Free Radical, cationic and anionic); condensation and copolymerization. Properties of polymers: Tg, Tacticity, Molecular weight – weight average, number average and polydispersity index. Techniques of polymerization: Bulk, emulsion, solution and suspension. Preparation, properties and uses of Nylon 6,6, and Epoxy resin.

---

UNIT II CHEMICAL THERMODYNAMICS
Terminology of thermodynamics - Second law: Entropy - entropy change for an ideal gas, reversible and irreversible processes; entropy of phase transitions; Clausius inequality. Free energy and work function: Helmholtz and Gibbs free energy functions (problems); Criteria of spontaneity; Gibbs- Helmholtz equation (problems); Clausius-Clapeyron equation; Maxwell relations – Van’t Hoff isotherm and isochore(problems).

---

UNIT III PHOTOCHEMISTRY AND SPECTROSCOPY
Photochemistry: Laws of photochemistry - Grotthuss–Draper law, Stark–Einstein law and Lambert- Beer Law. Quantum efficiency – determination- Photo processes - Internal Conversion, Inter-system crossing, Fluorescence, Phosphorescence, Chemiluminescence and Photo-sensitization. Spectroscopy: Electromagnetic spectrum - Absorption of radiation – Electronic, Vibrational and rotational transitions. UV-visible and IR spectroscopy – principles, instrumentation (Block diagram only).

---

UNIT IV PHASE RULE AND ALLOYS
Phase rule: Introduction, definition of terms with examples, One Component System- water system - Reduced phase rule - Two Component Systems- classification – lead-silver system, zinc-magnesium system. Alloys: Introduction- Definition- Properties of alloys- Significance of alloying, Functions and effect of alloying elements- Ferrous alloys- Nichrome and Stainless steel – heat treatment of steel; Non-ferrous alloys – brass and bronze.

---

UNIT V NANOCHEMISTRY
Basics - distinction between molecules, nanoparticles and bulk materials; size-dependent properties. nanoparticles: nano cluster, nano rod, nanotube(CNT) and nanowire. Synthesis: precipitation, thermolysis, hydrothermal, solvothermal, electrodeposition, chemical vapour deposition, laser ablation; Properties and applications.
TEXT BOOKS:
1. Jain P.C. and Monica Jain, “Engineering Chemistry”, Dhanpat Rai Publishing Company (P) Ltd., New Delhi, 2010.
2. Kannan P., Ravikrishnan A., “Engineering Chemistry”, Sri Krishna Hi-tech Publishing Company Pvt. Ltd. Chennai, 2009.
REFERENCES:
1. Dara S.S, Umare S.S, “Engineering Chemistry”, S. Chand & Company Ltd., New Delhi 2010 2. Sivasankar B., “Engineering Chemistry”, Tata McGraw-Hill Publishing Company, Ltd., New Delhi, 2008.
3. Gowariker V.R. , Viswanathan N.V. and JayadevSreedhar, “Polymer Science”, New Age International P (Ltd.,), Chennai, 2006.
4. Ozin G. A. and Arsenault A. C., “Nanochemistry: A Chemical Approach to Nanomaterials”, RSC Publishing, 2005.
SUBJECTS

---

---

GE6151 Computer Programming

L T P C
3 0 0 3
OBJECTIVES:
The students should be made to:
Learn the organization of a digital computer.
Be exposed to the number systems.
Learn to think logically and write pseudo code or draw flow charts for problems.
Be exposed to the syntax of C.
Be familiar with programming in C.
Learn to use arrays, strings, functions, pointers, structures and unions in C.

---

UNIT I INTRODUCTION
Generation and Classification of Computers- Basic Organization of a Computer –Number System – Binary – Decimal – Conversion – Problems. Need for logical analysis and thinking – Algorithm – Pseudo code – Flow Chart.

---

UNIT II C PROGRAMMING BASICS
Problem formulation – Problem Solving - Introduction to ‘ C’ programming –fundamentals – structure of a ‘C’ program – compilation and linking processes – Constants, Variables – Data Types – Expressions using operators in ‘C’ – Managing Input and Output operations – Decision Making and Branching – Looping statements – solving simple scientific and statistical problems.

---

UNIT III ARRAYS AND STRINGS
Arrays – Initialization – Declaration – One dimensional and Two dimensional arrays. String- String operations – String Arrays. Simple programs- sorting- searching – matrix operations.

---

UNIT IV FUNCTIONS AND POINTERS
Function – definition of function – Declaration of function – Pass by value – Pass by reference – Recursion – Pointers - Definition – Initialization – Pointers arithmetic – Pointers and arrays- Example Problems.

---

UNIT V STRUCTURES AND UNIONS
Introduction – need for structure data type – structure definition – Structure declaration – Structure within a structure - Union - Programs using structures and Unions – Storage classes, Pre-processor directives.
TEXTBOOKS:
1. Anita Goel and Ajay Mittal, “Computer Fundamentals and Programming in C”, Dorling Kindersley (India) Pvt. Ltd., Pearson Education in South Asia, 2011.
2. Pradip Dey, Manas Ghosh, “Fundamentals of Computing and Programming in C”, First Edition, Oxford University Press, 2009.
3. Yashavant P. Kanetkar. “Let Us C”, BPB Publications, 2011.
REFERENCES:
1. Byron S Gottfried, “Programming with C”, Schaum’s Outlines, Second Edition, Tata McGraw-Hill, 2006.
2. Dromey R.G., “How to Solve it by Computer”, Pearson Education, Fourth Reprint, 2007.
3. Kernighan,B.W and Ritchie,D.M, “The C Programming language”, Second Edition, Pearson Education, 2006
SUBJECTS

---

---

GE6152 Engineering Graphics

L T P C
2 0 3 4
OBJECTIVES:
To develop in students, graphic skills for communication of concepts, ideas and design of Engineering products.
To expose them to existing national standards related to technical drawings. CONCEPTS AND CONVENTIONS (Not for Examination)
Importance of graphics in engineering applications – Use of drafting instruments – BIS conventions and specifications – Size, layout and folding of drawing sheets – Lettering and dimensioning.

---

UNIT I PLANE CURVES AND FREE HAND SKETCHING 5+9
Basic Geometrical constructions, Curves used in engineering practices: Conics – Construction of ellipse, parabola and hyperbola by eccentricity method – Construction of cycloid – construction of involutes of square and circle – Drawing of tangents and normal to the above curves, Scales: Construction of Diagonal and Vernier scales. Visualization concepts and Free Hand sketching: Visualization principles –Representation of Three Dimensional objects – Layout of views- Free hand sketching of multiple views from pictorial views of objects

---

UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES 5+ 9
Orthographic projection- principles-Principal planes-First angle projection-projection of points. Projection of straight lines (only First angle projections) inclined to both the principal planes - Determination of true lengths and true inclinations by rotating line method and traces Projection of planes (polygonal and circular surfaces) inclined to both the principal planes by rotating object method.

---

UNIT III PROJECTION OF SOLIDS 5 + 9
Projection of simple solids like prisms, pyramids, cylinder, cone and truncated solids when the axis is inclined to one of the principal planes by rotating object method and auxiliary plane method.

---

UNIT IV PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF SURFACES 5+9
Sectioning of above solids in simple vertical position when the cutting plane is inclined to the one of the principal planes and perpendicular to the other – obtaining true shape of section. Development of lateral surfaces of simple and sectioned solids – Prisms, pyramids cylinders and cones. Development of lateral surfaces of solids with cut-outs and holes

---

UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS 6 + 9
Principles of isometric projection – isometric scale –Isometric projections of simple solids and truncated solids - Prisms, pyramids, cylinders, cones- combination of two solid objects in simple vertical positions and miscellaneous problems. Perspective projection of simple solids-Prisms, pyramids and cylinders by visual ray method .
COMPUTER AIDED DRAFTING (Demonstration Only) Introduction to drafting packages and demonstration of their use. TEXT BOOK:
1. Bhatt N.D. and Panchal V.M., “Engineering Drawing”, Charotar Publishing House, 50th Edition, 2010.
REFERENCES:
1. Gopalakrishna K.R., “Engineering Drawing” (Vol. I&II combined), Subhas Stores, Bangalore, 2007.
2. Luzzader, Warren.J. and Duff,John M., “Fundamentals of Engineering Drawing with an introduction to Interactive Computer Graphics for Design and Production, Eastern Economy Edition, Prentice Hall of India Pvt. Ltd, New Delhi, 2005.
3. Shah M.B., and Rana B.C., “Engineering Drawing”, Pearson, 2nd Edition, 2009.
4. Venugopal K. and Prabhu Raja V., “GE6152 Engineering Graphics”, New Age International (P) Limited, 2008.
5. Natrajan K.V., “A text book of GE6152 Engineering Graphics”, Dhanalakshmi Publishers, Chennai, 2009.
6. Basant Agarwal and Agarwal C.M., “Engineering Drawing”, Tata McGraw Hill Publishing Company Limited, New Delhi, 2008.
SUBJECTS

---

---

GE6161 Computer Practices Laboratory

L T P C
0 0 3 2
OBJECTIVES:
The student should be made to:
Be familiar with the use of Office software.
Be exposed to presentation and visualization tools.
Be exposed to problem solving techniques and flow charts.
Be familiar with programming in C.
Learn to use Arrays, strings, functions, structures and unions.
LIST OF EXPERIMENTS:
1. Search, generate, manipulate data using MS office/ Open Office
2. Presentation and Visualization – graphs, charts, 2D, 3D
3. Problem formulation, Problem Solving and Flowcharts
4. C Programming using Simple statements and expressions
5. Scientific problem solving using decision making and looping.
6. Simple programming for one dimensional and two dimensional arrays.
7. Solving problems using String functions
8. Programs with user defined functions – Includes Parameter Passing
9. Program using Recursive Function andconversion from given program to flow chart.
10. Program using structures and unions.
SUBJECTS

---

---

GE6162 Engineering Practices Laboratory

L T P C
0 0 3 2
OBJECTIVES: To provide exposure to the students with hands on experience on various basic engineering practices in Civil, Mechanical, Electrical and Electronics Engineering.
GROUP A (CIVIL & MECHANICAL)
I CIVIL ENGINEERING PRACTICE
Buildings: (a) Study of plumbing and carpentry components of residential and industrial buildings. Safety aspects.
Plumbing Works:
(a) Study of pipeline joints, its location and functions: valves, taps, couplings, unions, reducers, elbows in household fittings.
(b) Study of pipe connections requirements for pumps and turbines.
(c) Preparation of plumbing line sketches for water supply and sewage works.
(d) Hands-on-exercise: Basic pipe connections – Mixed pipe material connection – Pipe connections with different joining components.
(e) Demonstration of plumbing requirements of high-rise buildings.
Carpentry using Power Tools only:
(a) Study of the joints in roofs, doors, windows and furniture.
(b) Hands-on-exercise: Wood work, joints by sawing, planing and cutting.
II MECHANICAL ENGINEERING PRACTICE
Welding:
(a) Preparation of arc welding of butt joints, lap joints and tee joints.
(b) Gas welding practice
Basic Machining:
(a) Simple Turning and Taper turning
(b) Drilling Practice
Sheet Metal Work:
(a) Forming & Bending:
(b) Model making – Trays, funnels, etc.
(c) Different type of joints.
Machine assembly practice:
(a) Study of centrifugal pump
(b) Study of air conditioner
Demonstration on:
(a) Smithy operations, upsetting, swaging, setting down and bending. Example – Exercise – Production of hexagonal headed bolt.
(b) Foundry operations like mould preparation for gear and step cone pulley.
(c) Fitting – Exercises – Preparation of square fitting and vee – fitting models.
GROUP B (ELECTRICAL & ELECTRONICS)
III ELECTRICAL ENGINEERING PRACTICE
1. Residential house wiring using switches, fuse, indicator, lamp and energy meter.
2. Fluorescent lamp wiring.
3. Stair case wiring
4. Measurement of electrical quantities – voltage, current, power & power factor in RLC circuit.
5. Measurement of energy using single phase energy meter.
6. Measurement of resistance to earth of an electrical equipment.
IV ELECTRONICS ENGINEERING PRACTICE 13 1. Study of Electronic components and equipments – Resistor, colour coding measurement of AC signal parameter (peak-peak, rms period, frequency) using CR.
2. Study of logic gates AND, OR, EOR and NOT.
3. Generation of Clock Signal.
4. Soldering practice – Components Devices and Circuits – Using general purpose PCB.
5. Measurement of ripple factor of HWR and FWR.
SUBJECTS

---

---

GE6163 Physics and Chemistry Laboratory - I

L T P C
0 0 2 1
PHYSICS LABORATORY – I
OBJECTIVES:
To introduce different experiments to test basic understanding of physics concepts applied in optics, thermal physics and properties of matter.
LIST OF EXPERIMENTS
(Any FIVE Experiments)
1 (a) Determination of Wavelength, and particle size using Laser
(b) Determination of acceptance angle in an optical fiber.
2. Determination of velocity of sound and compressibility of liquid – Ultrasonic interferometer.
3. Determination of wavelength of mercury spectrum – spectrometer grating
4. Determination of thermal conductivity of a bad conductor – Lee’s Disc method.
5. Determination of Young’s modulus by Non uniform bending method
6. Determination of specific resistance of a given coil of wire – Carey Foster’s Bridge
CHEMISTRY LABORATORY-I LIST OF EXPERIMENTS
(Any FIVE Experiments)
OBJECTIVES:
To make the student to acquire practical skills in the determination of water quality parameters through volumetric and instrumental analysis.
To acquaint the students with the determination of molecular weight of a polymer by vacometry.
1. Determination of DO content of water sample by Winkler’s method.
2. Determination of chloride content of water sample by argentometric method
3. Determination of strength of given hydrochloric acid using pH meter
4. Determination of strength of acids in a mixture using conductivity meter
5. Estimation of iron content of the water sample using spectrophotometer
6. (1,10- phenanthroline / thiocyanate method)
7. Determination of molecular weight of polyvinylalcohol using Ostwald viscometer
8. Conductometric titration of strong acid vs strong base
SUBJECTS